Bring Core to life.

Four phases. Progress is saved on Core, so you can stop and resume at any point.

Take out Core and the power connector.

Plug Core into a power outlet using the power connector. Connect the cable to the port on the back of Core, then to the wall. Core has no power button; it starts when it receives power.

A white strip along the front edge means Core has power. If it stays dark, see Troubleshooting.

Open the Ghost app and follow the instructions to finish setup.

Ghost finds Core over the local network. Keep both machines in the same room while it searches.

Pairing takes under 30 seconds.

Choose your network and enter the password.

Core stores the network. You will not be asked again unless it changes. Once connected, Core reports that it is online.

Follow the instructions in the Ghost app to finish setting up your Core.

• Confirm the cable is seated in the port on the back. It clicks.
• Try a different outlet, bypassing any power strip or surge protector.
• Give it thirty seconds. Core takes a moment on first boot.

• Core and your computer must be on the same Wi-Fi network. Check you are not on a guest network or a VPN.
• Move them into the same room.
• Confirm the front light is on before retrying.

Settings › Model. Download another model and switch. Your context is unaffected; nothing is re-uploaded.